DVD ripper
Welcome to standalone DVD Player Region-free unlock guide. On our pages you
will find a lot of verified working unlock codes collected from many
different sources.
Whilst
we made every effort to ensure that the information contained inside
these pages is both accurate and up-to-date, we take NO responsibility
and accept no liability for any damage caused from applying these procedures
as laid down on these pages.
Use
them at your own risk!
|
DVD
Player model: Sony DVP-S535D
|
Code 1:
Turn on the unit
with the remote controller.
Wait until "no disc" appears in the unit's display.
Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. and "CODE" will appear in the
display.
Press the number key that corresponds to the disc zone you want to play
within the next 5 seconds (0: All regions / 1: Region#1 / 2: R#2/...
and so on).
Then, within 5 seconds, press: PAUSE, POWER... and voilą.
If you don't have good results, disconnect the equipment and repeat.
Code 2:
Put your player
in standby mode and then enter:
[0] [ENTER] - Default region code;
[1] [ENTER] or [UP] [ENTER] - Region 1;
[2] [ENTER] or [RIGHT] [ENTER] - Region 2;
[3] [ENTER] or [DOWN] [ENTER] - Region 3;
[4] [ENTER] or [LEFT] [ENTER] - Region 4;
[5] [ENTER] or [TITLE] [ENTER] - Region 5;
[6] [ENTER] or [DVDMENU] [ENTER] - Region 6;
[7] [ENTER] or [RETURN] [ENTER] - Region 7
[8] [ENTER] or [DISPLAY] [ENTER] - Region 8;
Code 3:
Put player into
standby modes by pressing power button on remote control.
Press Title button.
Press Clear button.
Press Power button.
